1:4
SHINYBOW DIGITAL/ANALOG AUDIO DISTRIBUTION AMPLIFIER SPLITTER
The 1:4 Digital/Analog Audio Distribution Amplifier is designed to
work as a splitter for Digital/Analog Audio applications. Capable
of splitting a Digital/Analog Audio signal from one source to four
devices with compatible inputs.
159.00
1:4
SHINYBOW STEREO AUDIO DISTRIBUTION AMPLIFIER SPLITTER
The 1:4 Stereo Audio Distribution Amplifier is designed to work as
a splitter for Stereo Audio applications. Capable of splitting a Stereo
Audio signal from one source to four devices with compatible inputs.
89.00
GEFEN
1:4 Component Audio CAT5 Distribution Amplifier
The 1:4 Component/Audio over CAT5 Distribution Amplifier sends up
to 4 identical sets of sparkling clear component video up to 1080p
and audio to remote locations via four CAT5 cables at distances of
up to 1000 feet.
719.00
1:2
SHINYBOW COMPONENT VIDEO DISTRIBUTION AMPLIFIER SPLITTER
The 1:2 Component Video Distribution Amplifier is designed to work
as a splitter for component video applications. Primarily made to
split a Component Video from one source to two displays. A built in
amplifier will boost the signal to the needed level, to prevent signal
loss.
169.00
1:3
GEFEN COMPONENT VIDEO SPLITTER
1:3 Component Audio Distribution Amplifier is the perfect solution
sending one source of high definition component video and analog or
digital audio to multiple displays at the same time.
179.00
1:8
COMPONENT VIDEO AMPLIFIER VIA CAT5 ( RECEIVER UNITS ARE REQUIRED )
One Component Input, Eight Component Outputs The 1:8 Component CAT5
Distribution Amplifier is the perfect solution for anyone who needs
to send one source to multiple displays in remote locations at the
same time. The 1:8 Component CAT5 Distribution Amplifier has eight
RJ-45 output connector and one Component input.
629.00
GEFEN
COMPONENT VIDEO RECEIVER ( SENDER HUB REQUIRED )
The Component CAT5 Distribution R connects via CAT5 cable to the 1x8
Component CAT5 Distribution Sender. The receiver can be connected
up to 330 feet away from the Sender unit. One CAT-5 cable connects
the sender and the receiver to each other, extending your video flawlessly.
112.50
1:9
SHINYBOW COMPONENT VIDEO + ANALOG/DIG AUDIO AMPLIFIER
The 1:9 Component Video/Audio Distribution Amplifier with Loop Out
is designed to work as a splitter for Audio/Video applications. Capable
of splitting a Component Video and Audio signal from one source to
nine devices with compatible inputs.
429.00
1X3
ATLONA COMPONENT VIDEO W/AUDIO DISTRIBUTION AMPLIFIER
The 1x3 Component w/Audio Distribution Amplifier is the perfect solution
for anyone who needs to send one source of high definition component
video with Audio to multiple displays at the same time. It supports
all component sources and displays. Supported resolutions up to 1080p.
